Stainless Steel 45° Mandrel Bends – 304L, 1.5mm Wall
304L stainless steel 45° mandrel bend with 1.5mm wall and a nominal 1.5D centreline radius (actual radius is approx. 1.38D). Made by Ultibend Industries. Suits exhaust, turbo and intake fabrication.
- Material: 304L stainless steel
- Wall thickness: 1.5mm
- Angle: 45°
- Centreline radius: 1.5D nominal (approx. 1.38D actual)
- Non-food grade
Dimensions
| OD (mm) | Dim A (mm) | Dim B (mm) | Dim C (mm) | Nominal radius (mm) | Weight (kg) |
|---|---|---|---|---|---|
| 50.8 (2") | 174.0 | 30.0 | 61.6 | 76.2 | 0.23 |
| 63.5 (2.5") | 199.0 | 30.0 | 69.3 | 95.3 | 0.32 |
| 76.2 (3") | 225.0 | 30.0 | 77.4 | 114.3 | 0.43 |
| 88.9 (3.5") | 250.0 | 30.0 | 85.1 | 133.3 | 0.57 |
| 101.6 (4") | 275.0 | 30.0 | 92.9 | 152.4 | 0.66 |
Radius figures in the table are nominal 1.5D values. The actual centreline radius is approx. 1.38D: about 70mm on 2", 88mm on 2.5", 105mm on 3", 123mm on 3.5" and 140mm on 4".
Tolerances
- Dim A (overall height): +1/-0mm
- Wall thickness: +0/-0.10mm
- Dim B, Dim C and radius: nominal
Note: All dimensions are nominal. A bend is usually formed to a slightly tighter radius to allow for springback, so if the radius is critical for your job, please contact us.

