Everlast Cyclone 313Pi Pulse MIG Welder

The Everlast Cyclone 313Pi is a professional-grade pulse MIG welding machine designed for fabricators who demand greater control, cleaner welds and advanced welding performance across a wide range of materials.

Built for fabrication workshops and industrial environments, the Cyclone 313Pi combines advanced Pulse MIG technology with intelligent synergic controls to deliver consistent weld quality while simplifying machine setup. Pulse MIG reduces spatter, improves weld appearance and provides superior heat control, particularly when welding thinner materials and aluminium.

The Cyclone 313Pi supports:

• Pulse MIG
• Standard MIG
• Gas-Shielded Flux-Cored MIG
• Gasless Flux-Cored MIG
• DC Stick Welding

Its synergic control system automatically optimises welding parameters, making setup faster while maintaining professional-quality weld performance.

Features & Benefits

• Digital microprocessor-controlled CC/CV IGBT inverter
• 130 mm TFT HD colour LCD display
• Intuitive user interface
• Standard MIG (Short Circuit & Spray Transfer)
• Synergic Single Pulse MIG
• Gas-shielded and gasless Flux-Cored welding
• E6010 root pass capability
• Synergic PowerSet mode
• Full manual adjustment mode
• Heavy-duty commercial workshop design
• Accepts 200 mm and 300 mm wire spools
• Standard or Synergic MIG operation
• Easy-to-use operator control panel
• Adjustable MIG waveform (inductance)
• Adjustable Stick Arc Force
• Adjustable burnback control
• Spool gun compatible
• Push-Pull gun compatible
• 30-program memory
• 2T / 4T trigger operation
• Adjustable gas pre-flow and post-flow

What's Included

• 36 Series MIG torch with 3 m lead and Euro connector
• Stick electrode holder with 3 m lead and 35 DINSE connector
• Earth clamp with 3 m lead and 35 DINSE connector
• Argon regulator with gas hose
• Spare M8 contact tip
• Steel liner for 1.2–1.6 mm wire (installed)
• Spare steel liner for 0.9–1.2 mm wire
• Installed V-groove drive rolls for 0.9–1.2 mm wire
• Spare V-groove drive rolls for 0.6–0.8 mm wire
• Spare V-groove drive rolls for 1.2–1.6 mm wire
• Spare flux-cored drive rolls for 1.2–1.6 mm wire

Specifications

Machine Type

Digital Microprocessor Controlled IGBT Inverter

Welding Processes

• MIG
• Single Pulse MIG
• Gas-Shielded Flux-Cored
• Gasless Flux-Cored
• DC Stick

Input Power

• 400 V
• 3 Phase

Output

Rated Duty Cycle

Electrical

• Open Circuit Voltage: 84 V

Output Range

Machine Features

• Variable MIG inductance
• Adjustable Stick Arc Force
• Single Pulse MIG
• Synergic pulse control
• Integrated 4-roll wire drive
• Self-contained wire feeder
• Wire feed speed up to 15.2 m/min
• Accepts 300 mm wire spools
• 30 Program Memory
• Spool gun compatible
• Push-Pull gun compatible
• 2T / 4T trigger operation

Welding Capacity

Steel & Stainless Steel

• Minimum material thickness approximately 0.6–0.8 mm
• Single-pass welding up to 13 mm
• Multi-pass welding over 25 mm

Aluminium

• Minimum material thickness approximately 2 mm
• Single-pass welding up to 10 mm
• Multi-pass welding over 25 mm

Actual welding capacity depends on material type, joint preparation, wire diameter, shielding gas, welding position and operator experience.

Notes

• For best daily performance, select a welder with capacity comfortably above your typical material thickness rather than operating continually at its maximum output.
• Smaller wire diameters may require optional drive rolls, liners or MIG torches for optimum performance.
• Aluminium welding requires a PTFE liner together with U-groove drive rolls.
• For dedicated use with 0.6 mm or 0.8 mm wire, a smaller MIG torch may provide improved wire feeding performance.
• Extended or dedicated gasless flux-cored welding is best performed using a dedicated flux-cored MIG torch.
• Power plug not included. Installation should be completed by a qualified electrician using the appropriate connector for the local three-phase supply.