RedSabre 6000 Industrial Handheld Laser Welder

The RedSabre 6000 is one of the most powerful handheld fibre laser welding systems available, delivering exceptional welding speed, deep penetration and outstanding weld quality for demanding industrial fabrication.

Powered by a 6000 W fibre laser source, the RedSabre 6000 is designed for heavy-duty production environments where conventional MIG or TIG welding can limit productivity. Its high power output enables significantly faster travel speeds, reduced distortion and deep single-pass penetration across mild steel, stainless steel and aluminium.

Capable of achieving up to 12 mm single-pass penetration in suitable materials, the RedSabre 6000 pushes beyond the capabilities of lower-powered handheld laser welders. Combined with the included wire feeder, it produces strong, fully fused welds with excellent bead appearance and minimal post-weld cleanup.

Designed specifically for 400 V three-phase power, the RedSabre 6000 is supplied as a complete package with everything required to begin welding, excluding shielding gas and filler wire.

Features & Benefits

• 6000 W fibre laser source
• High-performance optical pump system
• 400 V Three-Phase input power
• Class 4 industrial fibre laser
• Rated input: 23 kVA
• Water-cooled system
• Weld with filler wire from 0.8–1.6 mm
• Maximum single-pass weld capacity:
  • Mild Steel & Stainless Steel: Up to 12 mm
  • Aluminium: Up to 8 mm
• Integrated 4-roll digital wire feeder
• Optional dual wire feeder available for increased weld width
• Capable of autogenous (fusion) welding without filler wire
• Shielding gas:
  • Argon
  • Nitrogen (N₂)
• Cutting gas:
  • Compressed Air
  • Nitrogen (N₂)
• Recommended shielding gas flow:
  • Approximately 14 L/min
• 100% duty cycle for continuous industrial operation
• Travel speeds up to 125 mm/second, depending on material thickness and welding parameters

What's Included

• Laser-rated safety glasses
• 4-roll digital wire feeder
• Drive rolls for 0.8–1.6 mm wire
• 10 m fibre optic cable
• Continuous-wave handheld laser welding gun
• Power transformer
• Industrial water chiller

Specifications

Laser Type

• Fibre Laser
• Continuous Wave (CW)

Laser Output

• 6000 W

Input Power

• 400 V
• Three Phase
• 50 Hz

Rated Input

• 23 kVA

Cooling

• Closed-loop water cooling

Wire Size

• 0.8–1.6 mm

Shielding Gas

• Argon
• Nitrogen (N₂)

Cutting Gas

• Compressed Air
• Nitrogen (N₂)

Recommended Gas Flow

• Approximately 14 L/min

Fibre Cable Length

• 10 m

Welding Capacity

Mild Steel & Stainless Steel

• Single-pass welding up to 12 mm

Aluminium

• Single-pass welding up to 8 mm

Actual weld capacity depends on joint design, material type, welding position and operator technique.

Safety Information

The RedSabre 6000 is a Class 4 Fibre Laser, the highest laser hazard classification. Appropriate laser safety procedures must always be followed.

• Laser radiation is invisible and can cause serious eye and skin injury.
• Only use laser safety glasses specifically rated for the 1080 nm wavelength used by this machine.
• Standard welding helmets and conventional welding lenses must not be used as laser eye protection.
• Suitable laser safety barriers or enclosed work areas should be used to prevent accidental exposure.
• Operators should receive appropriate laser safety training before operating the machine.

For workplaces with employees, New Zealand health and safety legislation may require additional risk assessments, operator training and the implementation of laser safety procedures. Always ensure the laser system is installed and operated in accordance with applicable workplace safety requirements.

Consult your health and safety advisor and insurance provider to ensure your facility meets all applicable requirements before commissioning the machine.