RedSabre 1500X 4-in-1 Handheld Fibre Laser System

The RedSabre 1500X represents the next generation of fabrication technology, combining laser welding, laser cutting, laser cleaning and surface preparation into one compact, industrial-grade machine.

Handheld fibre laser technology is transforming the welding industry by delivering faster welding speeds, minimal distortion, lower heat input and significantly reduced post-weld cleanup compared to conventional welding processes. Advances in fibre laser design have made these systems more compact, reliable and affordable than ever, making them suitable for fabrication workshops, manufacturers and industrial maintenance operations.

Powered by a 1500 W fibre laser source, the RedSabre 1500X delivers exceptional precision when welding mild steel, stainless steel, aluminium and copper. The highly focused laser beam produces narrow, clean welds with excellent penetration while dramatically reducing spatter, heat affected zones and material distortion.

More than just a laser welder, the RedSabre 1500X is a true 4-in-1 system, capable of:

• Laser Welding
• Laser Cutting
• Laser Cleaning
• Laser Surface Preparation (Paint & Rust Removal)

The machine includes the nozzles, lenses and accessories required to change between each process without requiring additional equipment or upgrades. Simply select the desired process from the control system and connect the appropriate shielding gas or compressed air.

Designed for manual operation, the ergonomic handheld laser gun features a comfortable grip and balanced design to reduce operator fatigue during extended periods of use.

Features & Benefits

• 1500 W Fibre Laser
• Optical pump laser source
• 220–240 V Single Phase input
• Class 4 industrial fibre laser
• 20 A rated input
• Refrigeration-cooled system
• 4-in-1 functionality:
  • Laser Welding
  • Laser Cutting
  • Laser Cleaning
  • Surface Preparation
• Integrated synchronised wire feeder
• Capable of autogenous (fusion) welding without filler wire
• Supports filler wire from 0.8–1.6 mm
• Shielding gas:
  • Argon
  • Nitrogen (N₂)
• Cutting gas:
  • Compressed Air
  • Nitrogen (N₂)
• Recommended welding gas flow:
  • Approximately 14 L/min
• Travel speeds up to 125 mm/second, depending on material thickness and settings
• Continuous 100% duty cycle for industrial operation
• Ergonomic handheld laser gun
• Quick process selection through the control system
• Compact, portable industrial design

Welding & Cutting Performance

Root Gap Capacity

Maximum Single-Side Weld Capacity

Maximum Cutting Capacity

Actual welding and cutting performance will vary depending on joint design, material condition, operator technique and process settings.

Specifications

Laser Type

• Continuous Wave (CW) Fibre Laser

Laser Output

• 1500 W

Input Power

• 220–240 V
• Single Phase
• 50/60 Hz

Rated Input

• 20 A

Cooling

• Refrigeration-cooled

Wire Size

• 0.8–1.6 mm

Shielding Gas

• Argon
• Nitrogen (N₂)

Cutting Gas

• Compressed Air
• Nitrogen (N₂)

Recommended Gas Flow

• Approximately 14 L/min

Maximum Travel Speed

• Up to 125 mm/second

What's Included

• Synchronised wire feeder attachment
• Ergonomic handheld laser gun with 9 m cable
• Starter consumables kit including welding, cleaning and cutting nozzles
• D18T2 protective lens kit (5 pieces)
• D20T4.5 F800 focus lens
• Data cable
• Laser safety glasses
• Operating key

Safety Information

The RedSabre 1500X is a Class 4 Fibre Laser, the highest laser hazard classification. Appropriate laser safety procedures must always be followed.

• Laser radiation is invisible and can cause serious eye and skin injury.
• Only use laser safety glasses specifically rated for the 1080 nm wavelength used by this machine.
• Standard welding helmets and conventional welding lenses must not be used as laser eye protection.
• Suitable laser safety barriers or enclosed work areas should be used to prevent accidental exposure.
• Operators should receive appropriate laser safety training before operating the machine.

For workplaces with employees, New Zealand health and safety legislation may require additional risk assessments, operator training and the implementation of laser safety procedures. Always ensure the laser system is installed and operated in accordance with applicable workplace safety requirements.

Consult your health and safety advisor and insurance provider to ensure your facility meets all applicable requirements before commissioning the machine.

Downloads

• PDF User Manual
• PDF Product Brochure
• RedSabre Laser Performance Comparison Guide