Everlast RedSabre 1500 Laser Welder, Cleaner & Cutter

See how the RedSabre 1500 compares with other NZ laser welders →

The Everlast RedSabre 1500 is a 1500W air-cooled fibre laser for welding, cutting and removing rust, paint and surface contamination, made for professional fabrication workshops that want a compact, portable laser. Air cooling removes the need for the large, heavy water-cooling systems usually found at this power, reducing size, weight and maintenance.

It comes with the ergonomic SUP21T handheld laser gun, detachable colour touchscreen controls and a synchronised wire feeder. Fibre lasers give fast, accurate welds with less heat input than traditional welding. For manual operation only; not intended for automatic or CNC-controlled use.

Features

• 1500W fibre laser output, Class 4
• Air-cooled design with high-temperature diode technology
• 230–240V single phase, 50Hz input; 3500W maximum input power
• Detachable colour touchscreen controls
• Synchronised wire feeder included
• SUP21T ergonomic handheld laser gun
• Weld, cut and clean
• Autogenous welding (without filler wire)
• Shielding gas: argon or nitrogen (N₂); cutting gas: air or nitrogen (N₂)
• Welding gas flow approx. 14 L/min
• Travel speed up to approx. 127mm/sec depending on material and settings
• Up to 100% duty cycle (6-hour continuous rating at maximum output)

Welding and Cutting Capacity

• Welding, mild steel/stainless: max 4mm single side
• Welding, aluminium: max 3.5mm single side
• Welding, copper: max 2mm single side
• Root gap fill: 1.0mm without filler wire, 1.6mm with single wire feeder, 2.0mm with twin wire feeder
• Cutting, mild steel/stainless: max 5mm
• Cutting, aluminium: max 4mm

What's Included

• Synchronised wire feeder attachment
• SUP21T laser welding gun with 9m cable
• Starter consumables kit including welding, cleaning and cutting nozzles
• Spare D18T2 protective lens kit (5 piece)
• Spare D20T4.5 F800 focus lens
• D20T4.5 F150 focus lens (installed)
• Data cable
• Laser safety goggles
• Key switch

Recommended Applications

Automotive, stainless and aluminium fabrication, sheet metal manufacturing, engineering workshops, motorsport, agricultural repairs, industrial maintenance, rust and paint removal, and pre-weld surface preparation.

Laser Safety Information

This is a Class 4 laser system and requires appropriate safety controls. Laser radiation can cause serious injury even though the wavelength is outside visible light. Operators must use:

• Laser-rated safety eyewear suitable for the 1080nm wavelength
• Correct laser shielding equipment
• Approved laser safety procedures
• Appropriate operator training

Standard welding helmets and cutting shades are not suitable for laser operation. Businesses using laser equipment may need additional workplace safety procedures, operator training, certification and insurance approval. Always confirm local workplace safety requirements before installation and operation.