Everlast Cyclone 140E Inverter MIG Welder

The Everlast Cyclone 140E is a compact, lightweight 240V inverter MIG welder and the latest evolution of Everlast's i-MIG series. It suits beginners and experienced welders alike for light to medium-duty work in the home garage, workshop or on site.

Features

• Inverter design reduces weight and power consumption while improving arc stability and duty cycle
• Stepless voltage and wire speed control for precise adjustment, with no tapped settings
• Simple, familiar control layout that's easy for new and experienced welders
• Durable IGBT components for a long service life
• Smooth, stable arc with excellent wet-in for clean, consistent welds
• Heavy-duty wire drive for consistent feeding
• Takes 0.6–0.8mm (.023"–.030") wire
• Accepts 100mm (4") and 200mm (8") wire spools
• Spool gun capable (SM100N) for aluminium

Specifications

• Type: digital/micro-controlled IGBT inverter
• Process: MIG (flux core optional)
• Input voltage: 240V
• Max rated MIG output: 140A
• Rated duty cycle: 140A/21V @ 25%, 90A/18.4V @ 60%, 70A/17.5V @ 100% (all at 40°C)
• Maximum rated input current (I1eff): 19A
• OCV: 60V
• MIG output range: 25–140A / 15.3–21V
• Variable MIG inductance: no
• Spool gun capable: yes
• Standard drive roll: 0.6–0.8mm (.023"–.030") V groove
• Wire feeder: self-contained, 2 drive rollers
• Max wire feed speed: 385 IPM under load
• Max wire spool: 200mm (8"), up to 12lb
• Memory: no
• Pre-flow / post-flow: fixed
• Gun: Binzel/Trafimet type 15 series (appearance may vary from photos)

Welding Capacity

• Steel/stainless: up to 4.8mm (3/16") single pass, 9.5mm (3/8") multi-pass, minimum 24 gauge
• Aluminium (with SM100N spool gun): minimum 14 gauge, up to 3.2mm (1/8") single pass, 4.8mm (3/16") multi-pass

What's Included

• SN-15 MIG gun (uses SN-15 contact tip holder) with 3m (10ft) cable and Euro connector
• Ground clamp with 3m (10ft) cable and 25 DINSE connector
• Argon/CO2 regulator with 2m (6.5ft) hose
• Spare contact tip
• Drive roll: V groove 0.6–0.8mm (.023"–.030") (single)

Notes

• Flux core drive rolls are not included. For flux core, buy the drive roller separately under "MIG Parts".
• Generator use: the generator must be rated by its manufacturer as "clean power" (less than 5% total harmonic distortion) and at least 4800 surge watts for the full 140A output.
• To get full performance and duty cycle, make sure your breaker, wiring and socket are up to the job; you may need a dedicated circuit. If in doubt, talk to a licensed electrician before purchasing and see our terms and conditions/warranty.

Download the PDF manual | Download the PDF brochure