Everlast RedSabre 1300 Laser Welder, Cleaner & Cutter

See how the RedSabre 1300 compares with other NZ laser welders →

The Everlast RedSabre 1300 is a compact, air-cooled 3-in-1 handheld fibre laser for welding, cutting and cleaning, built for professional workshops, fabrication businesses, automotive repair and light manufacturing. Air cooling means no bulky external water chiller, so it's lighter and easier to move than water-cooled systems, and it sits on a benchtop.

It comes with the ergonomic SUP33T handheld laser gun, a colour touchscreen for simple setup, and a wire feeder as standard. Handheld fibre lasers give cleaner welds, faster travel speeds, lower heat input and much less distortion than conventional welding. For manual handheld operation only; not intended for automated or robotic use.

Features

• 1300W continuous wave (CW) fibre laser, Class 4
• 3-in-1: laser welding, cutting and cleaning
• Air-cooled, compact benchtop design
• Integrated wire feeder included
• Ergonomic SUP33T handheld laser gun
• Integrated colour touchscreen
• Suitable for autogenous (fusion) welding
• Travel speeds up to approx. 2.5m/min, depending on material, thickness and settings
• Continuous-duty design for extended operation

Specifications

• Laser type: continuous wave (CW) fibre laser
• Laser output: 1300W
• Input power: 220–240V single phase, 50/60Hz
• Maximum input current: 18A
• Maximum power consumption: 4.5kW
• Cooling: air-cooled
• Shielding gas: argon or nitrogen (N₂)
• Cutting gas: compressed air or nitrogen (N₂)
• Recommended shielding gas flow: 14 L/min
• Operating mode: manual handheld

Welding and Cutting Capacity

• Welding, mild steel and stainless: max 3.5mm single pass
• Welding, aluminium: max 2.5mm single pass
• Cutting, mild steel and stainless: max 4mm
• Cutting, aluminium: max 3mm

Actual performance varies with joint design, material type, surface condition, shielding gas and operator technique.

What's Included

• Ergonomic SUP33T handheld laser gun with 9m cable
• Integrated wire feeder
• Starter consumables kit including welding, cleaning and cutting nozzles
• Spare protective lens kit (5 pieces)
• D20F50CT 50mm collimation lens
• D20F150CT 150mm focus lens (installed)
• Data cable
• Laser safety glasses
• Operating key

Safety Information

The RedSabre 1300 is a Class 4 fibre laser, the highest laser hazard classification. Appropriate laser safety procedures must always be followed.

• Laser radiation is invisible and can cause serious eye and skin injury.
• Only use laser safety glasses specifically rated for the 1080nm wavelength used by this machine.
• Standard welding helmets and welding lenses must not be used as laser eye protection.
• Use suitable laser safety barriers or enclosed work areas to prevent accidental exposure.
• Operators should receive appropriate laser safety training before use.

For workplaces with employees, New Zealand health and safety legislation may require additional risk assessments, operator training and laser safety procedures. Consult your health and safety advisor and insurance provider to make sure your facility meets all requirements before commissioning the machine.